Manufacturer, Supplier & Exporter of Brass Cable Glands, Earthing and Electrical Wiring Accessories.
+91 63986 60876
Mr.Ravi Goel
© 2026 Lustre Electrical. All Rights Reserved. Designed & Developed by The Crowners
Ingress Protection
IP2X
Size
20mm to 90mm
Thread
Metric, NPT, BSP
Material
Brass CW614N
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Provides mechanical cable retention & electrical continuity via armoured wire termination in indoor area.
Finish : Brass, Nickel
Operating Temp. : -60°C to + 200°C
Cable Type : Single Wire Armour (SWA) Cable
Features : Armoured Ring
Accessories : PVC Shroud, Earth Tag
Ingress Protection
IP2X
Size
20mm to 90mm
Thread
Metric, NPT, BSP
Material
Brass CW614N
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Provides mechanical cable retention & electrical continuity via armoured wire termination in indoor area. It is easy to install.
Finish : Brass, Nickel
Operating Temp. : -60°C to + 200°C
Cable Type : Single Wire Armour (SWA) Cable
Features : Two Part Armour Lock
Accessories : PVC Shroud, Earth Tag, Galvanized Steel Lock Nut
Ingress Protection
IP66
Size
16mm to 90mm
Thread
Metric, NPT
Material
Brass CW614N, Stainless Steel 316L
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Providing environmental seal on the cable outer sheath. Also provides mechanical cable retention & electrical continuity via armoured wire termination in indoor and outdoor area with all types of SWA cable.
Finish : Brass, Nickel
Operating Temp. : -20°C to + 80°C
Cable Type : Single Wire Armour (SWA) Cable
Seal Material: Neoprene
Features : Armoured Ring and Outer Compression Seal
Accessories : PVC Shroud, Earth Tag, Serrated Washer and Entry Thread Seal
Ingress Protection
IP66
Size
16mm to 90mm
Thread
Metric, NPT
Material
Brass CW614N, Stainless Steel 316L
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Providing environmental seal on the cable outer sheath. Also provides mechanical cable retention & electrical continuity via armoured wire termination in indoor and outdoor area with all types of SWA cable.
Operating Temp. : -20°C to + 80°C
Cable Type : Single Wire Armour (SWA) Cable
Seal Material: Neoprene
Features : Armoured Ring and Outer Compression Seal
Accessories : PVC Shroud, Earth Tag, Serrated Washer and Entry Thread Seal
Ingress Protection
IP2X
Size
G204 to G755
Thread
Metric
Material
Brass CW614N, Stainless Steel 316L
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Provides mechanical cable retention & electrical continuity via armoured wire termination in dry indoor area for all types of SWA cables.
Operating Temp. : -60°C to + 200°C
Cable Type : Single Wire Armour (SWA) Cable
Features : Armoured Ring
Accessories : PVC Shroud and Earth Tag
Ingress Protection
IP66
Size
16mm to 115mm
Thread
Metric, NPT
Material
Brass CW614N, Nickel Plated Brass, Stainless Steel 316L
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Application : For indoor & outdoor use with all types of SWA cable providing environmental seal on both the cable inner & outer sheaths. Also provides mechanical retention & electrical continuity via armour wire termination.
Operating Temp. : -60°C to +125°C
Cable Type : Single Wire Armour (SWA) Cable
Features : Displacement Seal and Two part Armour Lock
Seal Material : LSOH Silicone Seal & LSOH Nylon Washer
Accessories : PVC Shroud, Earth Tag, Serrated Washer, Entry Thread Seal, Adaptor and Reducer
Application : For use with SWA plastic and rubber (Elastomer) sheathed cables. Used in dry indoor conditions
Accessories : Hot Dip Galvanized Mild Steel Clamp, Neoprene Gasket.
Size
16mm to 50mm
Thread
Metric
Material
Brass CW614N
Standard
BS 6121: Part-1:2005, EN 50262:1999, IEC62444:2010
Function : Recommended for use with braided, co-axial or SWA cables. A rubber seal compresses on cable to provide a tight fit against cable.
Ingress Protection: IP66
Features : Outer Compression Seal
Accessories : PVC Shroud, Earth Tag and Serrated Washer
Ingress Protection
IP65
Size
16mmto 115mm and 3/8 to 4″
Thread
Metric and BSC (ET)
Material
Brass BS 2874
Standard
BS 6121:Part-1:2005, EN 50262: 1999
Function : Providing seal on outer sheaths of unarmored cable in indoor and outdoor area.
Operating Temp. : -20°C to + 80°C
Features : Outer Compression seal
Accessories : Shroud, Earth Tag, Lock Nut and Serrated Washer.
Ingress Protection
IP66
Size
16mm to 115mm & ½” to 3½”
Thread
Metric, BSC (ET)
Material
Brass BS 2874
Standard
BS 6121:Part-1:2005, EN 50262: 1999
Function : For indoor & outdoor use with all types of SWA cable providing environmental seal on both the cable inner & outer sheaths. Also provides mechanical retention & electrical continuity via armour wire termination.
Operating Temp. : -20°C to +80°C
Cable type : Steel Wire (SWA) Cable
Features : Displacement seal and Universal anyway clamping ring
Accessories : Shroud, Earth Tag, Serrated washer, Lock nut and Entry Thread Seal.
